TwoLaserHead-PushJig/LaiPuLaser/WorkAreaMgr.cpp

#include "StdAfx.h"
#include "WorkAreaMgr.h"
#include "GlobalFunction.h"
#include "Propertie.h"
#include "PropertieMgr.h"
#include "DrawSimpleShape.h"
#include "AuthorityMgr.h"
#include "MsgBox.h"
#include "LogMgr.h"


CWorkAreaMgr *gWorkAreaMgr = new CWorkAreaMgr;
CWorkAreaMgr::CWorkAreaMgr(void)
{
     m_bDrawWorkArea = true;//是否绘制工作区域
     m_WorkRectColor = RGB_RED; //工作区域方框颜色
     m_WorkRectSize.w = 100;//工作区域方框尺寸(mm)
     m_WorkRectSize.h = 100;//工作区域方框尺寸(mm)
     RefrashWorkArea();
}
CWorkAreaMgr::~CWorkAreaMgr(void)
{
}
#if 1
CMFCPropertyGridProperty *CWorkAreaMgr::CreatGridProperty()
{
      CString PropertyName;//属性名称
      CString Description;//描述
      CString Path = _T("WorkArea");//存储路径
      CString Name;
//-------------------------------------------------------------------------------//
      PropertyName = _T("工作范围");
      CMFCPropertyGridProperty* pGroup = new CMFCPropertyGridProperty(PropertyName);
//-------------------------------------------------------------------------------//
      if(gAuthorityMgr->CheckAuthority(_FACTORY))
      {
         {
              //添加属性变量映射
              Name = _T("m_bDrawWorkArea");//变量名字
              CPropertie *pPropertie = new CPropertie;
              pPropertie->SetpVal((void*)&m_bDrawWorkArea);
              pPropertie->SetType(_PROP_TYPE_BOOL);
              pPropertie->SetpModule(this);
              pPropertie->SetPath(Path);
              pPropertie->SetName(Name);      
              pPropertie->WriteRead(true);//读取保存的属性
              
              //添加属性显示
              PropertyName = _T("显示工作范围");
              Description = _T("是否显示工作范围,工作数据需要在工作范围之内");
              CMFCPropertyGridProperty* p1 = new CMFCPropertyGridProperty(PropertyName, (_variant_t)m_bDrawWorkArea, Description);
              pGroup->AddSubItem(p1);
              gDevicePropertieMgr.Insert(p1, pPropertie);
          }
    //-------------------------------------------------------------------------------//
         {
              //添加属性变量映射
              Name = _T("m_WorkRectColor");//变量名字
              CPropertie *pPropertie = new CPropertie;
              pPropertie->SetpVal((void*)&m_WorkRectColor);
              pPropertie->SetType(_PROP_TYPE_COLOR);
              pPropertie->SetpModule(this);
              pPropertie->SetPath(Path);
              pPropertie->SetName(Name);      
              pPropertie->WriteRead(true);//读取保存的属性
              //添加属性显示
              PropertyName = _T("范围边框颜色");
              Description = _T("工作范围边框的颜色");
              CMFCPropertyGridColorProperty* p1 = new CMFCPropertyGridColorProperty(PropertyName,m_WorkRectColor, NULL, Description);   
              p1->EnableOtherButton(_T("其他..."));
              p1->EnableAutomaticButton(_T("默认"),RGB_BLACK);
              pGroup->AddSubItem(p1);
              gDevicePropertieMgr.Insert(p1, pPropertie);
         }
    //-------------------------------------------------------------------------------//
         {
              //添加属性变量映射
              Name = _T("m_WorkRectSize_w");//变量名字
              CPropertie *pPropertie = new CPropertie;
              pPropertie->SetpVal((void*)&m_WorkRectSize.w);
              pPropertie->SetType(_PROP_TYPE_DOUBLE);
              pPropertie->SetpModule(this);
              pPropertie->SetPath(Path);
              pPropertie->SetName(Name);      
              pPropertie->WriteRead(true);//读取保存的属性
              //添加属性显示
              PropertyName = _T("宽度");
              Description = _T("工作范围的宽度(单位:mm)");
              CMFCPropertyGridProperty* p1 = new CMFCPropertyGridProperty(PropertyName,(_variant_t)m_WorkRectSize.w, Description);   
              pGroup->AddSubItem(p1);
              gDevicePropertieMgr.Insert(p1, pPropertie);
         }
    //-------------------------------------------------------------------------------//
         {
              //添加属性变量映射
              Name = _T("m_WorkRectSize_h");//变量名字
              CPropertie *pPropertie = new CPropertie;
              pPropertie->SetpVal((void*)&m_WorkRectSize.h);
              pPropertie->SetType(_PROP_TYPE_DOUBLE);
              pPropertie->SetpModule(this);
              pPropertie->SetPath(Path);
              pPropertie->SetName(Name);
              pPropertie->WriteRead(true);//读取保存的属性
              //添加属性显示
              PropertyName = _T("高度");
              Description = _T("工作范围的高度(单位:mm)");
              CMFCPropertyGridProperty* p1 = new CMFCPropertyGridProperty(PropertyName,(_variant_t)m_WorkRectSize.h, Description);   
              pGroup->AddSubItem(p1);
              gDevicePropertieMgr.Insert(p1, pPropertie);
         }
  //-------------------------------------------------------------------------------//
         {
              //添加属性变量映射
              Name = _T("m_CenterPt_x");//变量名字
              CPropertie *pPropertie = new CPropertie;
              pPropertie->SetpVal((void*)&m_CenterPt.x);
              pPropertie->SetType(_PROP_TYPE_DOUBLE);
              pPropertie->SetpModule(this);
              pPropertie->SetPath(Path);
              pPropertie->SetName(Name);      
              pPropertie->WriteRead(true);//读取保存的属性
              //添加属性显示
              PropertyName = _T("中心点坐标x");
              Description = _T("工作范围的中心点坐标x(单位:mm)");
              CMFCPropertyGridProperty* p1 = new CMFCPropertyGridProperty(PropertyName,(_variant_t)m_CenterPt.x, Description);   
              pGroup->AddSubItem(p1);
              gDevicePropertieMgr.Insert(p1, pPropertie);
         }
    //-------------------------------------------------------------------------------//
         {
              //添加属性变量映射
              Name = _T("m_CenterPt_y");//变量名字
              CPropertie *pPropertie = new CPropertie;
              pPropertie->SetpVal((void*)&m_CenterPt.y);
              pPropertie->SetType(_PROP_TYPE_DOUBLE);
              pPropertie->SetpModule(this);
              pPropertie->SetPath(Path);
              pPropertie->SetName(Name);      
              pPropertie->WriteRead(true);//读取保存的属性
              //添加属性显示
              PropertyName = _T("中心点坐标y");
              Description = _T("工作范围的中心点坐标x(单位:mm)");
              CMFCPropertyGridProperty* p1 = new CMFCPropertyGridProperty(PropertyName,(_variant_t)m_CenterPt.y, Description);   
              pGroup->AddSubItem(p1);
              gDevicePropertieMgr.Insert(p1, pPropertie);
         }
     }      
//-------------------------------------------------------------------------------//
      return pGroup;
}
void CWorkAreaMgr::Ini()
{
    RefrashWorkArea();
}
void CWorkAreaMgr::ExportPar(ofstream  *pFile)
{
    (*pFile)<<"[模块] [CWorkAreaMgr]------------------------------------------------"<<endl;
    (*pFile)<<"[显示工作范围][m_bDrawWorkArea] = "<<m_bDrawWorkArea<<endl;
    (*pFile)<<"[宽度][m_WorkRectSize.w] = "<<m_WorkRectSize.w<<endl;
    (*pFile)<<"[高度][m_WorkRectSize.h] = "<<m_WorkRectSize.h<<endl;
    (*pFile)<<"[中心坐标][m_CenterPt.x] = "<<m_CenterPt.x<<endl;
    (*pFile)<<"[中心坐标][m_CenterPt.y] = "<<m_CenterPt.y<<endl;
}
void CWorkAreaMgr::OnPropertyChanged()
{
     RefrashWorkArea();
     //获取当前视类指针
     CLaiPuLaserView *pView = GetCurViewPtr();
     if(pView)
     {
         pView->RefreshView();
     }
}
void CWorkAreaMgr::Draw(CDC* pDC)
{
     if(gDraw->IsShowPlatformPos()==false)
     {
          DrawWorkArea(pDC);
     }
}
#endif
#if 1//工作区域
//获取工作区域Rect
DbRect CWorkAreaMgr::GetWorkArea()
{
    return m_DbWorkRect;
}
//刷新WorkRect 
void CWorkAreaMgr::RefrashWorkArea()
{
     m_DbWorkRect.L = m_CenterPt.x - m_WorkRectSize.w/2;
     m_DbWorkRect.R = m_CenterPt.x + m_WorkRectSize.w/2;
     m_DbWorkRect.T = m_CenterPt.y + m_WorkRectSize.h/2;
     m_DbWorkRect.B = m_CenterPt.y - m_WorkRectSize.h/2;
}
void CWorkAreaMgr::DrawWorkArea(CDC* pDC)
{
     if(!m_bDrawWorkArea)
         return;
     CPen Pen;
     Pen.CreatePen(PS_INSIDEFRAME,1,m_WorkRectColor);
     DrawRect(pDC,Pen,m_DbWorkRect,false);
     Pen.DeleteObject();
}
//检查数据是否在安全范围之内
bool CWorkAreaMgr::CheckWorkDataInSafeArea(vector<vector<Dbxy>> &vec)
{
     DbRect rect = GetWorkArea();
     
     vector<vector<Dbxy>>::iterator iter = vec.begin();
     vector<vector<Dbxy>>::iterator iter_end = vec.end();
     int size = vec.size();
     //所有的点都需要在范围内
     for(;iter!=iter_end;iter++)
     {
          vector<Dbxy>::iterator iter1 = (*iter).begin();
          vector<Dbxy>::iterator iter1_end = (*iter).end();
          for(;iter1!=iter1_end;iter1++)
          {
               if(IsPointInRect((*iter1),rect)==false)
               {
                    CMsgBox MsgBox;
                    MsgBox.Show("数据不在安全范围之内！",true);
                    return false;
               }
          }
     }
     gLogMgr->WriteDebugLog("数据检查OK");
     return true;
}
#endif