#include "StdAfx.h"
#include "MarkArea.h"
#include "DrawSimpleShape.h"
#include "Layer.h"
#include "TemplateMgr.h"
#include "ObjComponentMgr.h"
#include "GlobalFunction.h"
#include "LogMgr.h"
#include "CommonFlowMgr.h"
#include "GlobalDrawMgr.h"


#define MIN_OBJ_CNT     5     //最少obj 数量
CMarkArea::CMarkArea()
{
      UpdateSize();
      m_bSel = false;//选择状态
      Init();
}
CMarkArea::CMarkArea(Dbxy pt,DbSize size)
{
     m_RealBasePt = m_BasePt = pt;//基准点
     m_Size = size;//尺寸
     Init();
}
void CMarkArea::Init()
{
     m_AreaIdx = 0;//区域的编号
     m_AreaPenNum = 0;//第一个区域内obj 的笔号
}
CMarkArea::~CMarkArea(void)
{
}
#if 1
void CMarkArea::Serialize(CArchive& ar)
{
     if(ar.IsStoring())
     {
           ar<<m_BasePt.x;
           ar<<m_BasePt.y;
           ar<<m_Size.w;
           ar<<m_Size.h;
           ar<<m_Offset.x;
           ar<<m_Offset.y;
     }
     else
     {
           ar>>m_BasePt.x;
           ar>>m_BasePt.y;
           ar>>m_Size.w;
           ar>>m_Size.h;
           ar>>m_Offset.x;
           ar>>m_Offset.y;
     }
}
void CMarkArea::WriteWorkFile(vector<CLab> &LabVec)
{
     LabVec.push_back(CLab(LAB_NULL,m_BasePt.x));
     LabVec.push_back(CLab(LAB_NULL,m_BasePt.y));
     LabVec.push_back(CLab(LAB_NULL,m_Size.w));
     LabVec.push_back(CLab(LAB_NULL,m_Size.h));
     LabVec.push_back(CLab(LAB_NULL,m_Offset.x));
     LabVec.push_back(CLab(LAB_NULL,m_Offset.y));
}
void CMarkArea::ReadWorkFile(CLabVecRang &LabVecRang)
{
      int idx = LabVecRang.GetStart();
      m_BasePt.x = LabVecRang.GetDouble(idx++);
      m_BasePt.y = LabVecRang.GetDouble(idx++);
      m_Size.w = LabVecRang.GetDouble(idx++);
      m_Size.h = LabVecRang.GetDouble(idx++);
      m_Offset.x = LabVecRang.GetDouble(idx++);
      m_Offset.y = LabVecRang.GetDouble(idx++);
}
//更新尺寸为振镜范围
void CMarkArea::UpdateSize()
{
}
//获取area 的理论范围
DbRect CMarkArea::GetRect()
{
     DbRect rect(m_BasePt,m_Size);
     return rect;
}
void CMarkArea::Draw(CDC* pDC,bool bSel)
{
     CPen pen;
     if(bSel || m_bSel)
     {
          pen.CreatePen(PS_DOT,1,RGB_RED);
     }
     else
     {
          pen.CreatePen(PS_DOT,1,RGB_PINK);
     }
     double Gap = 0;//显示扩大一点
     DbSize size = GetSize();
     size.w += Gap;
     size.h += Gap;

     DbRect rect;
     rect.Creat(m_BasePt,size);
     //绘制外框
     DrawRect(pDC,pen,rect,false);

     //选择状态时在中间区域绘制网格线
     if(m_bSel)
     {
          double GridGap = gDraw->GetAreaGridGap();//网格间隔mm
          Drawgridding(pDC,pen,rect,GridGap);
     }
}
bool CMarkArea::DrawObjComponentVec(vector<Sptr<CObjComponent>> &vec,CDC* pDC,bool bSel)
{
       vector<Sptr<CObjComponent>>::iterator iter = vec.begin();
       vector<Sptr<CObjComponent>>::iterator iter_end = vec.end();
       for(;iter!=iter_end;iter++)
       {
             (*iter)->Draw(pDC);
       }
       return true;
}
//是否有工作数据
bool CMarkArea::HasWorkData()
{
     if(m_WorkData.Empty())
         return false;
     return true;
}
bool CMarkArea::IsPtInArea(Dbxy pt)
{
      return IsPointInRect(pt,DbRect(m_BasePt,m_Size));
}
void CMarkArea::SetBasePt(Dbxy pt)
{
      m_BasePt = pt;
      SetRealBasePt(pt);
}
#endif
#if 1
//获取实际中心位置
Dbxy CMarkArea::GetRealBasePt()
{
     if(m_RealBasePt.Equal(Dbxy(0,0)))
         m_RealBasePt = m_BasePt;
     return m_RealBasePt; 
}
//搜集在area 范围内的obj 数据(Product 是当前要加工的工件,主要用来偏移旋转数据)
void CMarkArea::CollectWorkData(bool bNeedSel)
{
     //清空数据容器
     m_WorkData.Clear();
     vector<vector<Dbxy>> &WorkDataVec =  m_WorkData.GetDataVec();
     //先搜集元件对象数据-----------------------------------
     //CollectComponentObj(WorkDataVec,bNeedSel);
     //如果没有收集到原件的数据才搜集layer 中obj 的数据
     if(WorkDataVec.empty())
     {
           //先找到在area 内的obj
           CObjContainer  ObjContainer;
           CollectLayerObjExt(ObjContainer,bNeedSel);
           int AreaCycleCnt = 1;
           for(int k=0;k<AreaCycleCnt;k++)
           {
                //提取obj 的数据点(理论值) 这些数据是相对于layer 中心的坐标
                ObjContainer.GetObjPtData(WorkDataVec,bNeedSel);
           }
     }
     if(WorkDataVec.empty())
         return;

     
}
//搜集layer 的obj ，在area 范围内的obj 加入到容器ObjContainer
void  CMarkArea::CollectLayerObjExt(CObjContainer  &ObjContainer,bool bNeedSel)
{
     //获得layer 的obj 容器直接操作
     CObjContainer &LayerObjContainer = gLayer.GetObjContainer();
     vector<Sptr<CObjBase>> &ObjVec = LayerObjContainer.GetObjVec();
     //依次判断每个obj 需要加入哪个markarea
     DbRect Rect = GetRect();
     vector<Sptr<CObjBase>>::iterator iter = ObjVec.begin();
     vector<Sptr<CObjBase>>::iterator iter_end = ObjVec.end();
     for(;iter!=iter_end;iter++)
     {
           if(!bNeedSel || (bNeedSel && (*iter)->IsSelected()))
           {
                if((*iter)->IsbMarkPt())//不要收集mark 点
                    continue;
                
                if(!(*iter)->IsbFillObj())//退火设备只收集填充对象
                    continue;
                if(!(*iter)->IsbCollected() && (*iter)->IsInRect(Rect,false))//只要一个数据点在rect 内都算
                {
                      (*iter)->SetbCollected(true);//设置为已收集
                      ObjContainer.AddObject((*iter));
                      m_AreaPenNum = (*iter)->GetPenNum();//区域内obj 的笔号
                }
           }
     }
}
//搜集元件对象(被收集的obj 会被标记,防止被其他的area 重复收集)
void  CMarkArea::CollectComponentObj(vector<vector<Dbxy>> &vec,bool bNeedSel)
{
      //收集area 内的数据
      gObjComponentMgr->CollectWorkData(GetRect(),vec,bNeedSel);
}
//通过数据范围来调整area 的中心和尺寸
void CMarkArea::AdjustByObj()
{
      //获得area 内的数据范围
      DbRect DataRect = gObjComponentMgr->SetMarkedStateRect(GetRect(),false);
      DbSize size = DataRect.GetSize();
      if(size.w>0 && size.h>0)
      {
           m_BasePt = DataRect.GetCenterPt();
           m_Size = size;
      }
}
#endif